| Swim Fit Chemical Instructions |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Chemical instructions: Reserve, Renew w/ Spa RX for Swim Fit 11 & 12 spas:
New water procedure: Make sure all spa pumps are on high speed prior to adding chemicals. ALL chemicals are added
directly into the filter for proper mixing. Add 8 oz. of Metal Gon. Test waters P.H. & Alkalinity and adjust with Spa Up or
Spa down as needed. Add 6 oz. of Reserve and 4 oz. of Renew to your spa to establish a Bromine reserve. After mixing
water for 5 minutes, turn off pumps. Take 1 spa RX cartridge and place into filter skimmer. These units are good for 6
months.
Weekly maintenance:
Monday: Test PH / Bromine levels with test strips. Adjust PH as needed. Add 2 oz of Renew. Add 2 oz. of Spa Defender,
and 2 oz of Brite & Clear as needed for water clarity. Add 2 oz of Enzyme as needed to remove body oil.
Wednesday: Add 2 oz of Renew
Friday: Test P.H. / Bromine levels with test strips. Adjust P.H. as needed. Add 4 oz. of Reserve and 4 oz. of Renew to
shock water.
If spa is being used daily, then it is easiest to just add 2 oz. of Renew after each use of the spa, and skip the Monday,
Wednesday and Friday Renew additions.
All doses above are the suggested amounts, but can be adjusted up or down as needed.
Once a week minimum: Pull filter out of spa and hose off under high pressure nozzle to remove loose dirt and debris.
Once a month, place filter in large container and soak with cartridge filter cleaner or Simple Green / Oxy Clean. Once a
year, drain and refill swim spa. Polish spa shell with Spa Fast Gloss.
The use of chemicals other than Leisure Time brand can cause damage to your spa shell and support equipment. This
damage will not be covered under your warranty. Any questions, please contact Swim Fit Swim Spas.
Chemical instructions: Reserve, Renew w/ Spa RX for Swim Fit 14, 15 and 16 spas:
New water procedure: Make sure all spa pumps are on high speed prior to adding chemicals. ALL chemicals are added
directly into the filter for proper mixing. Add 16 oz. of Metal Gon. Test waters P.H. & Alkalinity and adjust with Spa Up or
Spa down as needed. Add 10 oz. of Reserve and 8 oz. of Renew to your spa to establish a Bromine reserve. After mixing
water for 5 minutes, turn off pumps. Take 2 spa RX cartridges and place into filter skimmer. These units are good for 6
months.
Weekly maintenance:
Monday: Test PH / Bromine levels with test strips. Adjust PH as needed. Add 4 oz of Renew. Add 4 oz. of Spa Defender,
and 4 oz of Brite & Clear as needed for water clarity. Add 4 oz of Enzyme as needed to remove body oil.
Wednesday: Add 4 oz of Renew
Friday: Test P.H. / Bromine levels with test strips. Adjust P.H. as needed. Add 6 oz. of Reserve and 6 oz. of Renew to
shock water.
If spa is being used daily, then it is easiest to just add 4 oz. of Renew after each use of the spa, and skip the Monday,
Wednesday and Friday Renew additions.
All doses above are the suggested amounts, but can be adjusted up or down as needed.
Once a week minimum: Pull filter out of spa and hose off under high pressure nozzle to remove loose dirt and debris.
Once a month, place filter in large container and soak with cartridge filter cleaner or Simple Green / Oxy Clean. Once a
year, drain and refill swim spa. Polish spa shell with Spa Fast Gloss.
The use of chemicals other than Leisure Time brand can cause damage to your spa shell and support equipment. This
damage will not be covered under your warranty. Any questions, please contact Swim Fit Swim Spas.